DICE General Procedures

Creating a Hard Drive Disk Image
This procedure will walk the user through making a backup image of the hard drive on the industrial PC that runs the DICE systems. This procedure will use A...
Wed, 7 Jun, 2017 at 10:10 AM
DICE Composition Tool Software Manual
https://docs.google.com/document/d/1OeQVD-txPLsi_6F01V9983Hu6G3ZODxM7XyPsnSgljY/edit?usp=sharing
Mon, 27 Jun, 2022 at 2:35 PM
Installing Check Valve for Vacuum Upgrade on DICE-II
DICE II printing systems have support modules that create a vacuum which allows ink to circulate in the ink supplies. This vacuum system is necessary to kee...
Tue, 8 Nov, 2022 at 10:55 AM
Fixing Full C Drive - Reducing System Restore Storage Limit
Start menu -> Control Panel -> System - > System Protection -> Select drive that is full (C Drive) -> Configure.. ->  Lowe...
Wed, 10 Jun, 2020 at 1:47 PM
General Printbar Alignment and Material Thickness Calibration
See attached documentation for assistance aligning printheads in systems that use Meteor Drive electronics (typically made in 2018 or later).
Mon, 15 May, 2023 at 11:20 AM
Replacing a Check Valve on a DICEblade
See attached file for the procedure.
Tue, 8 Nov, 2022 at 10:57 AM
Circulation Pump Will Not Prime
See attached for a procedure to help prime heads on a modern ink supply (made 2017 or later). This procedure may also be referred to as the "Langford M...
Mon, 15 May, 2023 at 3:10 PM
Meteor PCC-E Micro SD Card Replacement
Over time, customers may experience irregularly long PCC-E connection times (anything longer than a minute is considered irregular). Replacing the Micro SD ...
Wed, 15 Feb, 2023 at 1:48 PM
Replacing Internal Ethernet Cable for DICEblade Control Board
While it is uncommon, it is possible for ethernet cables to fail. In this case, the failure of the cable is characterized by intermittent connections to the...
Thu, 13 Jul, 2023 at 4:28 PM